Wire Harness Bypass

1- Take 2 wires (blk w/red & wht w/red) from the stator and plug them directly into CDI box (same color wires)

2- CDI wires (plug orange and black) Run orange wire to hot lead on coil and ground the black wire

3- The black wire left on the CDI goes to a ground

4- Make sure to run ground from engine to frame

If you have an aftermarket Kill Switch- Run 1 lead to ground and other wire to hot lead on coil. Be careful not to run hot lead on coil to wire on killswitch that runs to the metal exposed part of the killswitch.